Catálogo
¿Por qué registrarse? Solo para mantener los bots fuera de nuestro catálogo. Tu email es privado — nunca lo compartiremos ni te enviaremos nada sin tu permiso. ¡Te lo garantizamos!
| Emisor | |
|---|---|
| Año | 65 BC - 55 BC |
| Tipo | Inicie sesión para ver los detalles |
| Valor | Inicie sesión para ver los detalles |
| Moneda | Inicie sesión para ver los detalles |
| Composición | Inicie sesión para ver los detalles |
| Peso | Inicie sesión para ver los detalles |
| Diámetro | Inicie sesión para ver los detalles |
| Grosor | Inicie sesión para ver los detalles |
| Forma | Round (irregular) |
| Técnica | Inicie sesión para ver los detalles |
| Orientación | Inicie sesión para ver los detalles |
| Grabador(es) | Inicie sesión para ver los detalles |
| En circulación hasta | Inicie sesión para ver los detalles |
| Referencia(s) | Inicie sesión para ver los detalles |
| Descripción del anverso | Heavily corroded and worn field bearing the heavily degraded remnants of a design imitating a Late Iron Age British gold stater of the Chute type, struck on an irregular bronze flan subsequently plated with gold. The original design elements — typically a stylised laureate head derived from the Macedonian stater prototype — are no longer legible, having been entirely obscured by extensive patination, encrustation, and corrosion consistent with the loss of the thin gold wash over the base-metal core. The flan exhibits an irregular, scalloped edge characteristic of hand-struck contemporary counterfeits of the period. |
|---|---|
| Escritura del anverso | Inicie sesión para ver los detalles |
| Leyenda del anverso | Inicie sesión para ver los detalles |
| Descripción del reverso | Inicie sesión para ver los detalles |
| Escritura del reverso | Inicie sesión para ver los detalles |
| Leyenda del reverso | Inicie sesión para ver los detalles |
| Canto | Inicie sesión para ver los detalles |
| Casa de moneda | Inicie sesión para ver los detalles |
| Tirada | ND (65 BC - 55 BC) - Base Core ND (65 BC - 55 BC) - Gold plated |
| Información adicional |
Contemporary counterfeits of Iron Age staters were produced close enough to the originals in time and place to circulate alongside them — these were not later forgeries made for collectors but coins intended to deceive in everyday transactions. Gold-plating over a bronze core was the most common method, exploiting the fact that most recipients had no reliable way to test fineness on the spot. The "chute" designation refers to a specific production method in which molten metal was poured through a channel system, leaving diagnostic flow lines and sometimes a visible seam where the mold halves met.